The PV street-lamp has been dimensioned to work with programmed turning ON up to 12 hours per night with reduced luminous flux and autonomy of 4 days in case of NO SUN condition. The electronic circuit, with nominal voltage 12/24V (autodetect), has the function of charge regulator with MPPT technology. It makes the research of the point of the module’s maximum power (MPPT) and it allows the regulation of activation hours according to the produced energy (auto-management algorithm).The control electronics of the PV street-lamp must have on the same printed circuit board the possibility to connect a hardware module for system control and setting through a Radio or GSM communication module.

PV street-lamp must have:

- 1 control electronics with light sensor working – time bands – through sensor of PV module with programmable turning off with timer by n° 4 internal switches;

- 1 electronics for LED with flux reduction;

- 2 12V 100Ah Pb sealed batteries without maintenance (tot. 200Ah 12V)

- 1 UV resistant kit of cables;

- 1 stainless steel (INOX) top-of-pole mounting structure with drawer for batteries having lateral opening that can be regulated with different inclination tilts. Or Bottom of the Pole You must choose in options.

- 1 street LED luminaire. 2170 lm (102 lm/W – If=350mA – Tj=Tamb=25°C)

- 1 lamp-bracket

NOT INCLUDED: 

- 1 PV module to be properly dimensioned according to the place / latitude of installation and the requested hours of lamp activation per night; .(not incluided)

- 1 galvanized tapered pole 7 meters over ground(h tot 7.8m, diameter at the bottom =168mm, diameter on the top= 102mm, metal thickness = 4mm). (not incluided) If you want to replace the head of a normal existing street Lamp does not need to purchase, is optional, you can use the same Pole, considering the size and height.

PV module and pole must be properly dimensioned, contact our Technical Department.