Lamps with Led devices (light emitting diodes) are without a doubt, bet on future technology for lighting with low power consumption and help us to reduce the effects of excess emissions. With these new lighting devices, our electricity bill may be reduced in a very significant percentage for the fact that we can replace incandescent 50w halogen lamps for LED equivalents at 3W, 5W or 7W consumption.
RoHS lead-free products

Features
• High-power LED Chip EPIST the highest quality.
• Maximum brightness.
• Minimum 70% of its initial brightness even after 35,000 insured hours.
• Energy performance than any traditional halogen bulb.
• Make cold light free of UV or IR.
• Up to 100,000 hours of operation.
• Superior Light Uniformity of color tone.

3300K color tone

Electrical Characteristics:
Input voltage 12 Vdc / Vac
1x 3W LED HighPower
Power Consumption <3W
Housing Aluminum
Docking GU5.3

Opticians
Warm White Luminous flux: 90 lumens super FLUX
Life> 35,000 hrs
Available Beam Angle 15 ° 40 ° 60 °

Environmental
Operating temperature -20 ~ 50 C °
Storage Temperature -40 ~ 60 ° C Operating Humidity 10 ~ 90%

Natural cooling system

WARNING:

To avoid possible damage to your eyes, please do not look directly at the internal light emitting diode or encouraging others to do so.
Do not use this model for outdoor applications.
Although our model of LED lamp does not exceed 65 º C temperature and special radiator is designed to create a flow of cooling air, we recommend not to mount this device in areas of poor ventilation or very close, as this could cause irreversible damage the lamp short to medium term.
Do not connect this lamp voltages greater than those prescribed: 12 VDC / VAC nominal. In the case of voltages not recommend using power supplies 12 VDC nominal output even though the margin accepted by the lamp voltage is 10 to 17 VDC. In any case it is advisable to use power supplies with output voltage of reliable quality.
In the cases of replacement of traditional halogen lamp never connect your LED if the existing ballast is electronic type with output AC voltage VAC. In the event that the ballast is of a kind traditional transformer ensure its quality and does not produce stresses greater than 15 volts peak, or that this tension is not too volatile, and that both factors could destroy his new LED lamp or at least drastically reduce their life.
This product is manufactured with components free of contaminants such as lead in RoHS compliant force. Once the life of use of this product place it in the recycling points locally.